answersLogoWhite

0


Best Answer

Check fuses, switch, and if they are ok, then it is probably the window regulator's motor that has quit. You may want to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.

1- check the fuses going to the power windows 2- the switches may be corroded and may need to get some contact renew spray on them. 3- there may be a physical jam on the window mechanism that prevent the movement of the windows 4- the motot also has a ttemperature cutout built in that may not be working --- try leaving the ignition OFF for a while then put the key into the mode that normally enables the windows to work then try immediately to open/close the window and listen if you hear any sounds.

- re-check all the fuses and relays

SOMETIMES U can SMACK the INSIDE of the door Panel where the motor is while holding the switch,IF that does't work then U probably JUST need a gears kit 4 the window motor.Most parts stores carry the gear kit 4 Ford prodcts

User Avatar

Wiki User

โˆ™ 2015-07-16 18:28:51
This answer is:
User Avatar
Study guides

Where I can purchase purchase HID Fargo ID card in Dubai

โžก๏ธ
See all cards
โ˜†โ˜…โ˜†โ˜…โ˜†โ˜…โ˜†โ˜…โ˜†โ˜…
No Reviews

Add your answer:

Earn +20 pts
Q: How would a repair be made on a 1998 Lincoln Town Car front power window if the window does not move and a motor cannot be heard spinning?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How to repair Lincoln window gear?

depends on what's the problem


How do you repair power windows on a 2001 Lincoln Town Car?

were is the fuse for driver power window 2001 lincoln town car


How do you repair a drivers side window motor on a 1988 Lincoln Town Car?

Remove the inside door panel of your 1988 Lincoln Town Car. Remove the wiring harness from your window motor. Remove the window motor retaining screws. Reverse the process to install a new window motor.


Where do the cable end on the electric window motor connect to?

The ends connect to the spool that's driven by the motor.Once that come off the track or break, you cannot repair them. You must replace the entire regulator.Here's how:http://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator


How can you raise a power window on a 97 Honda Accord manually since the motor is dead?

It cannot be raised manually. You will have to repair it in order to raise the window.


How do you replace the back window on a 1985 Lincoln Town Car?

By taking it to a auto glass repair shop. This is definitely not a DIY job.


How do you repair window weatherstripping on 1998 blazer?

If you cannot just refasten weatherstripping to fix it, the easiest way is to replace it. Apart from that, when replacing weatherstripping on a window, it is good to replace all of the material, not only the damaged part. If you cannot repair it yourself, it is always possible to take the car to the mechanic.


Where can I find information about car window repair?

You can go to the dealership or call a window repair specialist. It cost around $150 to repair the chip in my window from a window repair specialist. However, if you are the do-it-yourself type, then you can get instructions on the eHow website. They offer step-by-step instructions with pictures on how to repair it yourself.


How would a repair be made on a 1973 Lincoln Mark IV front power window if the window does not move and the motor can be heard?

Inside of the gear house for the powerwindowmotor there are some plastic-gears that probably has lost it teeth's. :) It is impossible to repair unless you happens to have a huge machine park in your garage... Replacement parts should be available at your local Lincoln partspusher...


How can you manually close a power window?

You cannot manually close a power window. You must repair the problem causing it not to work. Check the fuse, power window switch, and if they are good, you may need a new motor.


How do you repair power window on 1990 Lincoln Mk7?

In A nutshell ,carefully remove door panel, Drill 3 holes ,big enough to get a socket through, where the window motor bolts are. Unplug motor Carefully maneuver window motor out.


How do you repair a power window on a 2000 Toyota Camry?

Remove the inside door window panel. Make sure the window is on the window track. Make sure the window linkage is not needing repair. Replace the window motor.

People also asked