Loosen the nuts holding the blade - remove them if necessary. 2) Loosen the blade tightener - generally adjacent to the blade - needs a flat screwdriver. 3) Hook the new chain on the sprocket driver and slip the blade back towards the sprocket and install the chain in the blade groove. 4 )Tighten or replace the nuts loosely. Make sure the blade tightener is in the hole on the blade. 5) Replace the chain tension with the screwdriver. 6) Tighten the blade nuts and recheck chain tension. It should move by hand.
mcculloch 14" 2.0 chain saw using champion dj7y plug....what is correct gap?
No
need a diagram for mcculloch eager beaver chain saw
54 cc
McCulloch chainsaws are still made in north America by Husqvarna Tool Corp.
If you will type, "Mcculloch MS40A Parts" in a search engine you will find many online sources for parts for this saw.
The fuel mixture for a 2.0 McCulloch chain saw is 32 to 1. This means that there is 1 part of 2 cycle oil mixed per 32 parts of fuel.
A timber bear is 55cc. http://store.chainsawr.com/
40:1
16:1
yes
I have a owners manual for a McCulloch Super 55A and on the Manual there is a date of Sept 1958 I am looking for muffler for it