If you are just using the load to pull a small amount of current, then yes a electronic circuit can be used for that. If you want a resistive load to measure voltage drop or something similar, then no an electronic circuit will usually not work for that.
No, a geyser is a resistive load.
No load is the least destructive load to a switch.
When using a resistive load bank to test a generator, it does not matter if you load the generator to its kW or kVA rating, because those two numbers are the same when considering a resistive load. Power factor, which is the difference between true and apparent power, only comes into play when there is a reactive (inductive or capacitative) load.
the ampere i=0is theonlyedge where the e0b and e0c can come together and share the load and that way the two vector diagrams will connected and the load will be less resistive and more on the ek0 and c73 resistive load. the 38f93 relay will be the one to break the load 2u3 and e0b and e0c into diffrent components that will be drawn in the diagram.
It is resistive much load
If you are just using the load to pull a small amount of current, then yes a electronic circuit can be used for that. If you want a resistive load to measure voltage drop or something similar, then no an electronic circuit will usually not work for that.
resistive loadAnswerIf the current is driving a motor, then the load is resistive-inductive.
The PF will increase
No, a geyser is a resistive load.
the filament is made of tunguston which is having high resistance value,Hence it's resistive load
specification of inductive load,capactive load,resistive load in laboratory
No load is the least destructive load to a switch.
For a resistive load it is 120 Watts.
Inductive since it has a motor with windings.
when a capacitor or any chargeable device connected across a load which may be resistive or inductive than the capacitive device discharges and this discharging of this device is called electronic discharge . it is used in CCD (charged coupled devices).
When using a resistive load bank to test a generator, it does not matter if you load the generator to its kW or kVA rating, because those two numbers are the same when considering a resistive load. Power factor, which is the difference between true and apparent power, only comes into play when there is a reactive (inductive or capacitative) load.