answersLogoWhite

0


Best Answer

No its not. It is diffcult even with proper tools.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Is it easy to install a Rack and Pinion on a 98 Saturn SL?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where can I find rack and pinion steering parts?

It's an easy fix, visit this website and look through their available parts, you will find what you're after and it's easy enough to install the parts yourself so you can save a bit of money while you're at it. http://www.autopartswarehouse.com/steering_rack~pop.html


How do you get the rank and pinion out of the steering collum?

The rack and pinion is attached to the far end of the steering column from the steering wheel. It normally in or just below the engine compartment. Depending on your car this can be enormously complicated and difficult or quite easy. I recommend you get a copy of a proper repair manual for your car.


Why might the electric fan and AC not work on my 1995 Saturn SL1?

You probably have a bad coolant temperature switch, this are fairly cheap and easy to install.


What tools are required to install a cargo rack myself?

Installing a cargo rack is very easy, and requires few tools, all of which you should have in the house. You usually need a screwdriver, and possibly some hexkeys and a hammer. Otherwise, installation should be pretty simple.


What are the steps to install a wall coat rack?

It is very easy for an individual to install a coat rack on the wall. First, a person needs to obtain their supplies. Second, the person needs to locate the stud in the wall they will be using. Then, the individual needs to measure and mark where the holes will go. After the holes are marked, the person safely attaches the wall coat rack to the marked areas. The person should use a level to determine if the wall coat rack is level. Last, the person needs to add safety devices to make sure the wall coat rack is safe and secure.


Where is the power steering pressure sensor located in a 2002 dodge neon?

located on the top of the rack and pinion fairly easy to remove i cant remember what size wrench its a 2 wire sensor look the part up on rockauto.com its like 20 bucks....


Is it possible to convert a car from manual to power steering?

You can do it. I did it on my 1996 Saturn, but I did it while I was changing the engine. The new engine came with a power steering pump, so I also purchased a new power steering rack as well, and while I had the engine out I removed the old manual steering rack and put in the new one, connected the hoses, and voila, I had power steering. I'm not sure all cars are this easy, but my Saturn was. .


How difficult is it to install a wall mounted coat rack?

Extremely easy. All you will need is a level, a drill, and some screws. If you are mounting to drywall make sure to use dry wall anchors.


How easy is Saturn to spot from earth?

not easy i dont think


Can Saturn be seen with the unaided eye?

Yes, Saturn is often easy to see.


How do I install roof rack cross bar on Mitsubishi Endeavor?

Slide the end covers on rear straight back. Install cross bars. Slide cover back on. Easy Thanks - I found out that you need a "pin" to release the front and rear end covers. I used a center punch as the pin in the small circular hole on each cover. After that, it really was easy!


What are some of the Network Software that is easy to install?

BearFlix is an easy to install network software that comes with easy to use instructions.