0
Is it possible to replace the timing chain on a 22re Toyota engine without removing the cylinder head also does the front differential on a 4x4 need to be removed for access to the timing cover?
Wiki User
∙ 16y ago
you do not need to remove head or differential.i never have
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
2.2 liter lebaron Is it possible to change the rings on 3 cylinder without removing engine from car From underneath oil Pan?
Yes, with the cylinder head and oil pan off the piston could be removed.
Replacing a lock cylinder for a 94 Ford Thunderbird?
You can replace the locking cylinder, on your 1994 Ford Thunderbird, by removing the inside door panel. The locking mechanism will be visible with the door panel removed.
What step must you perform before removing the piston from the bore to prevent damage?
Depending on the amount of wear in the cylinder, there may be a ridge at the top of it. If there is much of a ridge, the rings in the piston will catch on this and possible damage the piston. The ridge can be removed with a ridge reamer.
How do you change the lock on the tailgate of a 1998 Chrysler Town and Country?
To replace lock cylinder in the hatch ,first inside hatch panel must be removed. After removing the panel you will have access to the lock cylinder. Remove the linkage to the cylinder and pull the retaining clip from the cylinder and the lock can be removed from the outside of the latch. This is not a hard job to do , 1 hour max if your slow .
Is there a retainer clip that needs to be rmoved inside the differential housing on the end of the axle before removing it?
Yes and it is called a C-clip. Not being SMART, But you should have someone that has removed them before / Do it for you.
How do you change the cylinder head cover gasket without removing the aluminum inlet manifold peugeot 206 1.9d DW8 engine?
it does not need to be removed.
Is it possible to have two hysterectomies?
That depends. A hysterectomy is when the uterus is surgically removed. If the entire uterus is removed then a second hysterectomy is not possible. In the past it was common for the surgeon to leave the cervix (the lower part of the uterus) in place while removing the rest of it. If this was done then it would be possible to have another surgery where the remnant that was left the first time is removed.
Can removing a spark plug crack a cylinder?
Can Spark Plug Removal Crack a Cylinder?No, spark plugs screw into a threaded hole in the cylinder "heads," and therefore cannot crack a cylinder [wall around the pistons].NOTE however, that if spark plugs are not removed and reinstalled PROPERLY, this process can "strip" and ruin the threads in the cylinder "HEAD."
How do you get bleach off of shoes what product?
If the bleach has soaked in it will have removed colour from the material. So even removing the bleach if possible, will not fix the stain. You may need to re-dye if possible.
97 Chevy Malibu 4 cylinder replace water pump?
The water pump on a 97 Chevy Malibu 4 cylinder is replaced by removing the engine accessories, drive belt, and radiator hoses. The pump can then be unbolted, removed, and a new pump installed.
Can human DNA chromosomes be artificially removed to prevent genetic or hereditary diseases like removing the extra chromosome 21 which causes down syndrome?
At present this is not possible.
Can you walk again after most of the muscle of your thigh has been removed?
Walking is still possible after removing thigh muscles. The legs can be assisted with walking aides. These range from crutches to canes.
