Not that I'm aware of (unlike my '86 Olds 88 where you shorted two contacts, and it flashed the engine code in Morse Code). Some local parts stores will read the engine code for you (with their scan tool).
not possible without world-engine
Try turning the key to "on" position without engine running and step on accelerator 3 times
I'm certainly NOT a mechanic but .... since the trouble codes are stored in the vehicle's on-board computer I doubt that there IS any way to retrieve them without a device and a program that can "read" the car's computer.
Yes ... You need to support the engine from above,there is a hanger that attaches to the top of the shock towers that has a hook on it that will support the engine, when you remove the engine cradle (frame) below.
As long as the 1999 has the 3.5L engine, yes.
What does 'service engine soon' light mean on a 1998 olds intrigue?
Underneath the engine
On the 99 Olds Intrigue, the camshaft sensor is located on the rear of the engine. It is just above the starter.
how do change the spark plugs and the coil pack on a 2000 Oldsmobile intrigue
Bottom of the engine
In the right kick panel. On my 98 Intrigue it's it the engine compartment in the black box connected to the air filter.
You could use a Sterling Cycle heat engine.
4.6 US quarts
6 US Quarts.
With a scan tool.
Dealerships or junkyards.
The horn relay on an Oldsmobile Intrigue is on the driver's side of the engine compartment. It is in the corner where the back firewall meets the fender of the vehicle.
A 2001 Oldsmobile Intrigue with the 3.5L V6 engine takes 5.6 quarts of oil.
attached to the engine near the flywheel You have to go under the car. toward the back of the engine.
Where can I find a engine schematic on line, for a 1999 Oldsmobile Intrigue 3.5 V6.
Connect an OBD2 scan tool which will retrieve the codes set by the ECU. If you mean how to check to see if the light is working just turn the key on without starting the engine. The check engine light will illuminate.
Behind the glove compartment.