Yes, that sounds like a reasonable plan. - Make certain you carefully mask over any vulnerable areas.
The controller has a paint scheme for MW3
Krylon fusion.
I spray painted my car and noticed over-spray on my polycarbonate eyeglass lenses the next morning. I tried soap and water but that removed none of the paint specks. I called my optometrist and they warned against using any solvent like paint remover or acetone on polycarbonate lenses. It would be OK on glass lenses, but i think polycarbonate is a plastic. So I tried 70% rubbing alcohol and some lens paper and with a little rubbing the paint specks came off. I quickly rinsed the lenses with water to remove the alcohol residue. The optometrist's office said it is not a good idea to let any substance besides water soak into the lenses as it may make them more brittle.
ANYTHING! as long as you add adhesion promoter before you apply the paint, this allows you to use any kind of paint and they will stick to plastic.
Yes, but depending on the kind of paint you use, the result may be ugly and/or sticky, ruining the look and feel of the device. It would be easier to buy a chrome-colored controller than to paint it yourself.
NO colour can be clear. If something is CLEAR that means it has no colour.
you have to remove the clear coating
If sand it you will sand all of the paint of not just the clear part.
It is NOT possible !
It is NOT possible !
it doesn't means clear
I have a clear coat and a coat of capture log home stain (Sashco) on my log home, I would like to paint over it with a latex paint, is this possible?