It will set up too quickly.
It is best to remove the vinyl tile. If it is not on cement and is on wood you can install cement backer board. Be sure to put thin set under the board. If you spend the money and time to install ceramic tile and the vinyl tile comes loose all that $ is down the drain What is the best tile cement to use and this cement tile can be installed on vinyl tile and install ceramic tile on it
You would be wise to put fibrous cement sheeting on the walls first to give you a more reliable and uniform surface for fastening the tiles. tiles directly on to wood is risky to say the least.
Ceramic tile contractors install ceramic tile floors in any room of a house, and they are specialized and do a great job. They also install other types of tiles, such as ceramic wall tiles, and ceramic countertop tiles.
Green screed by BAL
You can, but you want to be sure the ceramic tile is not cracked or broken, make sure it is even, and not loose. It is reccomended that you you always remove any old tile before tiling. You can always lay a subfloor on top of the old tile to ensure your new tile was crack or pop out.
It is best to remove the vinyl tile. If it is not on cement and is on wood you can install cement backer board. Be sure to put thin set under the board. If you spend the money and time to install ceramic tile and the vinyl tile comes loose all that $ is down the drain What is the best tile cement to use and this cement tile can be installed on vinyl tile and install ceramic tile on it
If it sits over a cement floor, then no. If it is a nailed down floor, then you can, but you still have to install a cement board.
Tile is best placed onto cement or cement boards. With that stated Custom Building Products, one the biggest makers of tile thinsets and cement boards says it is allowable, although not preferred to install on CDX plywood but your total floor must be 1 1/4" with all subfloors. Back splashes in areas that are not exposed to steam or water can install onto plaster walls.
No, slate requires a mud bed or cement board subfloor.
This is not a good idea without using a cement /mortar board underlayment.
It is certainly possible to tile a floor, but bear in mind, there is much more pressure placed on the floor than on the walls, and floor tile must be laid over a solid cement base, otherwise it is going to crack.
The amount of cement will depend on the size of the tile, since a larger trowel is needed for larger tile.
Not JUST a grout no. You can get a cement that will also work as a grout but a pure grout would not have the adhesion required to stick the tiles to the wall properly, you should not use it as a cement.
Thinset tile cement.
you have to remove paint n rough the surface then put some cement slurry n paste the tile by cement
If you are positive that it is asphalt I would not suggest adhering tile directly to the asphalt. If removal of asphalt is not an option I would install a subfloor and use thinset mortar to adhere the tile. Another option (probably the better option) would be to pour a concrete mix over the asphalt. Than use thinset to install the tile. The concrete will incapsolate the asphalt. Asphalt more than likely has oils in it and can be a hazard.
Cant must use under lament like cement board or detra soils wood moves to much