0
Is the bolt holding the crank shaft pulley on Buick 3.8 Right or Left hand thread?
Wiki User
∙ 9y ago
It is standard right hand thread. Righty tighty, lefty loosey.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
1990 Chrysler lebaron is the serpentine belt tensioner bolt right or left hand thread?
The bolt holding the pulley to the tensioner arm is left hand thread. The nut holding the tensioner to the engine is right hand thread.
Is the crankshaft pulley bolt left hand or right hand thread?
Right hand thread
Mitsubishi gto crankshaft pulley is the bolt right or left hand thread?
Right hand thread
Is the bolt on the tension pulley right or left hand thread on a 1994 f150?
facing the engine you turn to the right it is r/ hand thread if you look at tne bolt head which is behind the pulley
Is the main crankshaft pulley bolt a left hand thread or right hand thread on a Isuzu big horn 3.1td year 1996?
More than likely it is right hand thread.
How do you remove crankshaft pulley bolt from a Nissan Pathfinder is it right or left hand thread?
1998 Nissan pathfinder crankshaft pulley bolt is right handed.
Does a crankshaft pulley the one that's on the bottom of the block on a 1993 2.4 frontera have a left hand thread or a right hand thread?
i am sure its left hand thread
Is the camshaft pulley bolt right handed or left handed thread on a 2004 chrystler pacifica 3.5L?
It is a regular right hand thread bolt. Lefty loosey, righty tighty.
Is the center bolt for the crank pulley reverse threads on the 2002 Saturn sl2?
No,it is right hand thread.
Is the thread on the bottom pulley of your 1999 vauxhall frontera left or right?
left hand thread i had to take mine off on my 1993 2.4 frontera hope this helps
Is the pulley bolt a left hand thread or right hand thread when removing the tensioner pulley from a 90 Olds Regency 98 3.8L FI engine?
The bolts are right hand thread (BUT) U DON"T want 2 remove the bolt in the center of he pully.U have 2 replace the tensioner & bracket assembly.There is many pounds of pressure on the tensioner spring
How do you remove 1997 Avalon crank shaft pulley?
remove 22mm center bolt its regular thread there are 2 threaded holes in pulley you will need the right pulley remover with the right bolts for the pulley you can get this at most parts stores make sure to not mess up crankshaft bolt threads
