0
Is the harmonic balancer retaining bolt on gm 3800 right hand or left hand thread?
Wiki User
∙ 12y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Is the threading for a harmonic balancer left or right handed on a 92 Toyota pickup?
harmonic balance has left hand thread
1989 jeep Is the harmonic balancer bolt righthand or lefthand thread?
Normal right hand thread. Counter clock wise to loosen.
Is the bolt for the harmonic balancer on a Nissan 3.0L left or right hand thread?
The bolt is just a standard right hand thread. Just took one out of an '01 Xterra.
Are the threads on the bolt left or right thread where it goes through the harmonic balancer and in the crank on 1974 Chevy 350 c you engine?
They are standard right hand threads.
Are the threads of the harmonic balancer left or right on a 1994 Plymonth Voyager?
Right
Are the threads right or left hand on 1997 regal harmonic balancer bolt?
Right handed.
Do a Chevy 5.3 left handed treads on harmonic balancer?
no, threads are right handed.
Are the threads of the harmonic balancer left or right on a 1993 lebaron?
They are right handed. Turn counter clockwise to loosen.
How to remove harmonic balancer bolt on a 1991 elite Oldsmobile 98 is harmonic balancer bolt left handed or right handed thread?
Take it off as you would a normal bolt. It is a 'Right Handed' thread. Use a breaker bar or impact wrench. I also used a breaker bar with a 15/16 inch socket. I place the breaker bar up against the frame and after removing the spark plug wires at the coil I tapped the ignition key. It took a while but eventually it came loose.
Where is the camshaft position sensor on a 1992 Oldsmobile 88?
Its under the harmonic balancer cover. You can see the wiring on the right (front) side of the cover. Pull the harmonic balancer to replace it, make sure you line-up the teeth right in the magnetic pick-up.
Why does your 91 Buick century idols high after replacing harmonic balancer?
sounds like you broke the crank sensor that is mounted right behind the balancer.
How do you remove a hamonic balancer from a 96 Plymouth breeze 2.0?
You need to get a special harmonic balancer pulley. You can rent them from AutoZone for $70 (you get it back when you return it)...a normal harmonic balancer pulley WILL NOT work. Chrysler vehicles have their own pulley. It's a fairly simple procedure once you have the right pulley.
