Yes. It's located on the front righthand side of the engine. Follow the radiator hose up to it. You can't really see it standing in front of the car, have to kinda feel for it. You'll need a rachet with an extension to get to it. I believe the socket you'll need is 3/8'', the classic Honda bolt size.
The gasket must be on both sides of the flange of thermostat before installing.
To change a 1995 Acura Legend starter, remove the 4 bolts around the intake pipe and lower radiator hose. Remove the starter and replace with new.
I have a Acura Integra LS 1995 with an Acura Stereo, I have the Code but I can Not reset it , what are the steps to reset it? please help me ...
The 3.2 liter V6 engine in a 1995 Acura Legend has a timing BELT
replacing headlights on a acura legend 1995
The thermostat is located just below the htrottle linkage at the throttle body. Follow lower radiator hose to engine. It is in the housing at the end of hose.
The oil pan on a 1995 Acura Legend is changed by draining the oil, removing the retaining bolts, and lowering it from the engine. The components are then cleans, a new gasket installed, and the pan bolted back in place.
No, it does not.
There is no such thing as a 1998 Acura Legend. They were last produced in 1995. After 1995 Acura began making RLs instead of Legends. Perhaps you mean 1998 RL?
just over 200 hp
According to the owners manual 195.1 inches
take your screwdriver put it in the engine and remove.
The thermostat is inside its housing on the upper radiator hose on the engine block side.
Yes, any C32A engine from 1991-1995 will fit in any other model/trim within that year range, with no modifications.
Raise or lower the temperature to change the reading on the thermostat.
According to the owners manual 18 gallons
Changing a thermostat on a 1995 Jeep Cherokee is very easy to do. The thermostat has two bolts holding it in place. Take the bolts off and remove the thermostat from the casing and replace with a new one.
change your thermostat
take the water outlet off the top of the engine and the thermostat should be right there
how do you replace an alternator on a 1990 integra
Remove the water supply hose from the top of your thermostat housing. Remove the thermostat housing retaining bolts. Lift the old thermostat out and drop in the new thermostat.
Yes it will as long as is the same generation models. the 1991 model up to 1995 sedan and coupe as the same engine mount even the type 2 will fit , and some of the 1996 ,97 rl
The thermostat should be located in the top radiator hose inlet at the engine. The hose and inlet need to be removed to change the thermostat.