Yes get either a premade swap harness or take a sr harness and try doing it yourself.
People claim that it is useless to do. I guess the poor flow of the SR head wouldn't be practical to put on a higher displacement 2.4
4 cylinders 16 valves.
on the exhaust manifold side towards the rear of the engine where it mounst to the transmission
CA18DE(T) RWD & SR20DE(T) RWD clutches have different bolt patterns on the pressure plate. The CA18DE & KA24DE clutches are VERY similiar. You can use the KA24DE pressure plate on the CA18DE(T) flywheel, but you must remove one of the dowel pins. The fit is extremely tight, but it works.
No. These are totally different engine families.
Magnetec 10w-40 should be the best oil
Yes, it should bolt straight in, the loom might need some modifications depending on what model you have.
no it is not
27mm
No, it has a chain All Nissan sr20's have cam chains. if you keep up good servicing this part should last the life of the engine.
rb25dett its the skyline engine the sr20 is a little cheaper if your going to spend the money go rb 25 and get much more performance and alot less people have that engine in there swapped 240s so it makes it unique.
buy a Nissan sr20 2.0 litre turbo charged engine