My wife has a 2004 Tahoe and I bet I know why you're asking this question. Knocking when you turn the wheel, acts like it wants to stall when turning at a slow speed, resistance when turning? There is a problem with the steering assembly and Chevy will not allow the problem to go to a recall status. They have determined the issue falls within factory specs and is considered a regular service issue. You can grease the steering U joint yourself or have a mechanic do it for about $175.
Not an answerable question. Missing need option and specific identification of what steering shaft. There are at least three.
No
i have a 1997 Chevy Tahoe and the steering wheel will locked up when am making a turn or a curve
The 1997 Chevrolet Tahoe OBD 2 port is on lower edge of dash to the left of steering wheel
I paid $17.99 at Advance Auto Parts. It is a 1997 LT.
It is the only electrical part that's in the distributor. Remove the cap and rotor and you will see it.
the steering box was replaced and the air bag light came on I was careful not to push the steering shaft to far in.
Cam shaft sensor is located under the power steering pump on the block
What is the towing capacity of 1997 Tahoe?
on top of the transfer case output shaft housing. should be held in by a ten mm bolt.
It's a 1997 Tahoe
== == == == the 2007 probably has a different offset than the 1997. == ==