No there is not.
No. A Chevy Blazer does not have a reset switch.
Turn the ignition switch to the auxiliary position. Do not start the engine. Leave the ignition switch in the auxiliary position for 30 seconds. This will reset your alarm system.
There is none.
No, there is no suck switch.
Take the key out of the ignition and wait 10-15 minutes then try again. Also try using a spare key, yours may be worn. If all else fails you may have to replace the ignition switch.
You can't bypass or reset security system, bring it to the dealer.
It doesn't have a reset switch. GM does not use inertia switches.
There is no fuel reset (inertia switch) button on that blazer or any GM for that matter. That is a Ford thing.
To reset the service indicator. Switch off the ignition. Push and hold the mileage reset button (on the right) switch on the ignition (whilst still holding the button) the display will count down from 10 to 0 when it reaches 0 let go switch off the ignition and switch on the indicator should now be reset.
To reset the service indicator. Switch off the ignition. Push and hold the mileage reset button (on the right) switch on the ignition (whilst still holding the button) the display will count down from 10 to 0 when it reaches 0 let go switch off the ignition and switch on the indicator should now be reset.
Yes, the ignition switch must be in the ignition position -not- the accessory position.
A computer should not have an ignition system.