depress the tensioner pulley with a ratchet and take off the belt installation is the opposite
use your eyes and brain,
Bookstores and auto part retailers sell books on how to fix issues in a vehicle. Installing a starter on a 1987 Chevy Caprice can be found in the books.
To remove the serpentine belt use a 1/2" breaker bar to rotate the tensioner upward off the serpentine belt while removing the belt from the pulleys. When installing the new belt make sure the belt is aligned properly in the grooves of the accessory pulleys(or the costly new belt will be shredded when the engine starts). Install the serpentine belt under the tensioner pulley by rotating the tensioner upward with the 1/2" drive breaker bar. When the breaker bar is released the tensioner will keep the belt properly tensioned.
Also in order to loosen the serpentine belt you have to use a wrench or something and turn on the bottom pulley....easy remove the serpentine belt for the fan area and remove the two bolts that hold the alternator down and unclip the wiring harness
Installing an alarm on this vehicle is not much different than any mid-90's GM auto.If you're installing a remote starter combo then you might have to learn how to by-pass the VATS system.That is the factory anti-theft device that comes on this car.
Check out Advance Auto Parts at this link. http://www.partsamerica.com/ProductList.aspx?parttype=1063&searchfor=Serpentine+Belts&ptset=A VBD
Easy, take a 1/2" drive breaker bar and insert it into the square 1/2" slot on the back of the alternator bracket and pull. This will loosen the tension on the belt which can then be removed.
Depends on what you mean by "bubble" Caprice...
Caprice Cole's birth name is Caprice Charmaine Cole.
Caprice Swiercinsky's birth name is Caprice Michelle Wilkerson.
Caprice Bourret's birth name is Caprice Valerie Bourret.
Caprice Bourret is 42 years old (birthdate: October 24, 1971).