a very regular problem about this is no the lcd, the problem is the led that is back the lcd, just replace it.if the numbers you can see them just in the night im sure is just the led.
The easiest way to reset your 2002 VW Beetle radio is to remove the radio fuse. Keep the radio fuse out for 10 seconds and replace it to its original slot.
The only way to fix the backlight when it's dim is to replace the LCD. On ebay there are parts and people who service these jobs for cheap
Just contact Motorola. They should be able to tell you where to go to get a new two-way radio battery or help you get your old one to charge. Batteries.com will have the two way radio battery that you need. They have a huge variety and will be cheaper than getting one from Motorola.
Send it back to Sony. This job is way too complex for most people to do themselves. Go to www.sony.com
No. There's no effect from magnetism in an LCD TV.
Have it repaired or replace the radio. Either way, you need to remove the whole unit.....
There is no way to hook a LCD to a router. The router is only made for "network" traffic. It's way different then the signals needed for the LCD. You only connect the ethernet cable from the computer to the router.
HD is way better.
Samsung LCD TVs start at around $300 for the 32" models. They go all the way up to around $1,500 for the 65" models. LED and LCD are similar and the main difference is that the LCD can have a ghosting effect.
We prefer LCD. We have two and they are great. LCD is the only way to go Plasma TVs are better for viewing rooms where you can control the lighting. If glare is an issue then go for an LCD
Yes, but you'll need way more detail than you can get from a simple answer. You need: The 8051 micro, an LCD interface the LCD, and software to get the 8051 to drive the LCD. You may be able to find a kit/project that already contains these items.
I just took my 2004 silverado to the dealership before my warranty runs out. The radio had a light out on the tuner knob and I had a light out in the dash behind the oil pressure. The dealership told me that the radio would have to be replaced and the dash membrane would have to be replaced. I asked them point blank about the radio light. They said "No way to replace the bulbs." I don't get it, but they replaced the radio under warranty. Yes bulbs are replaceable. You need to track down the replacement chevrolet/delco bulbs remove the burnt out bulbs using solder and then reheat the solder and install the new replacement.