Change engine oil, or check oil indicator?
When the red sleeve shows in the window, the air filter is clogged. the indicator is connected to the engine side of the air filter, and the increase in vaccum causes the indicator to trip. It can be reset by pushing in the button on the end.
Clear all PCM codes.
Turn key to on position with out starting. Press the select/reset knob until the "engine oil life indicator" is displayed. Hold down the knob for at least 10 seconds. The "engine oil life indicator" will blink. Hold down the select/reset knob for at least 5 seconds. The "engine oil life indicator" will be reset to 100%.
A person can reset the service engine light in a 1998 Tahoe by disconnecting the battery cables for 1 minute. After the battery cables are reconnected, the light should turn itself off.
Turn key on, do not start,Then push the gas pedal all the way to the floor 3 times then turn key off. and then start engine. Light will go out in a few seconds.
The service indicator light, in your Mercedes ML 270, can be reset by holding in the engine oil life button. The engine oil life will go to 100 percent. The service indicator light should go off.
You will need a reset tool to reset the service indicator on the Mercedes e240. You will reset the indicator by using the buttons on the dash.
A = Change oil1= Rotate tires To reset this turn the ignition switch to the ON position. 2. Press the Select/Reset knob until the engine oil life indicator is displayed. 3. Press the Select/Reset knob for about 10 seconds. The engine oil life indicator and the maintenance item code(s) will blink. 4. Press the Select/Reset knob for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life indicator will reset to "100."
A = Change oil1= Rotate tires To reset this turn the ignition switch to the ON position. 2. Press the Select/Reset knob until the engine oil life indicator is displayed. 3. Press the Select/Reset knob for about 10 seconds. The engine oil life indicator and the maintenance item code(s) will blink. 4. Press the Select/Reset knob for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life indicator will reset to "100."
The reset oil indicator on a 2000 BMW 323i warns the driver that it is time to service the engine. It is automatically set to trigger every 3,000 miles and can be reset once the oil has been changed.
After repairing the cause of the code, you clear the code with a scan tool.
To reset the service indicator wrench:Hold down the odometer reset button with the ignition offWait for the trip indicator to show 0's. Then turn the ignition on, but don't start the carLet go of the reset button, and press the M button.