0
Add your answer:
Earn +20 pts
How do you shut off the water if there are no valves under the bathroom sink?
If there are no valves under the bathroom sink, there are three other possibilities:There will be a valve on the line between your water heater and the sink.There will be a valve on the main line that comes into your house. If you have a basement, check along the wall on the side that is nearest to the street, as this is where the line comes in.There will also be a valve on the water meter, which is found at your property line near the street. The access will always have a steel cover, which is sometimes as large as a manhole.In any case, all that it takes is a good pair of pliers to turn off the valve.
How does one fix a shower valve?
First decide if you want to take a shower valve repair yourself, or contact a plumber. If you decide to repair the shower valve yourself, first you will need to shut off all water to the shower and tub.Next, turn the valves to the on position to relieve any pressure, and remove the set screws. Next, remove the trim ring and save all of the gaskets. Take all of the valve parts to a home improvement store where they will assist in finding you all the replacement parts. Lastly, you'll need to put everything back together in reverse order.
Why should use globe valve in bypass line of control valve?
The purpose of the bypass and the globe valve would depend on the function of the system. The bypass might be used to allow a small amount of flow around the control valve to warm or purge the line prior to startup, or it might be there as a failsafe to prevent inadvertent total shutoff of the line by the control valve. In any case, a globe valve in the bypass line provides adjustability along with the ability to shutoff the bypass flow and Globe valve has following advantages. 1.Good shutoff capability 2. Moderate to good throttling capability 3. Shorter stroke (compared to a gate valve) 4. Available in tee, wye, and angle patterns, each offering unique capabilities 5. Easy to machine or resurface the seats 6. With disc not attached to the stem, valve can be used as a stop-check valve.
Difference between butterfly valve and gate valve?
Butterfly valve refers to a kind of valve whose closing part (butterfly plate) is a disc, which rotates around the valve shaft to achieve opening and closing. It mainly plays a role of cutting off and throttling on the pipeline. The butterfly valve opening and closing part is a disc-shaped butterfly plate, which rotates around its own axis in the valve body to achieve the purpose of opening and closing or adjustment. The butterfly valve is usually 90° from fully open to fully closed. The butterfly valve is simple in structure, small in size and light in weight, and consists of only a few parts. Moreover, it can be opened and closed quickly by rotating 90°, and the operation is simple. The opening and closing part of the gate valve is a gate. The movement direction of the gate is perpendicular to the direction of the fluid. The gate valve can only be fully opened and fully closed, and cannot be adjusted or throttled. The gate has two sealing surfaces. The advantages of the gate valve: small fluid resistance, less effort to open and close, no restriction on the flow of the medium, no turbulence, no pressure reduction
What is the difference between pressure relief valve and pressure reducing valve?
nothing, its just terminology why A pressure relief valve is a safety device to prevent over pressure in such things as compressor receivers. A pressure reducing valve drops the pressure to the requirements of the user or tool. Such as a demand valve on scuba gear.
Is a carbon monoxide detector gas shut off valve made?
CO, Natural Gas and LPG Detectors are available to configure any desired protection system. Wirless signal from the detectors is sent to a Control Panel and that powers a gas shut off valve.
What does a shut off valve regulate?
An air-intake engine shut-off valve regulates air-flow to the motor, and operates as an emergency shut-off valve. There are also shut-off valves on water hoses, so shut-off valves really control the inflow of any liquid or gas.
Where is Valve Shut Off on gas water heat?
On any water heater, the shut off is on the incoming cold pipe.
Where is the fuel shut off valve in a 1996 grand caravan?
Not sure why you'd ask such a question in the first place, but there is no shut off valve. The fuel pump (which is inside the tank) is operated by a relay (which receives a signal from the computer). Don't know if any of that helps.
Would you be able to find a shut off valve to keep water from entering heater coil?
There is no shut off valve. But you can by pass the heater core by disconnecting the 2 hoses going to the heater core. And connecting them together. The only problem with this is that you won't have any heat in the winter.
Is there a emergency fuel shut off valve for onan generators?
Not any that I am aware of on the small units. Some do have solenoids that shut off the fuel when you shut down the engine. The larger ones have a emergency shut down button. This shuts off anything hooked to the control system.
Do you need a water shut off for an ice maker?
In most countries, the law clearly states that any fixture which draws water and comes from a live main feed shall always have a water shut off valve.
What age can you work a back hoe?
Any kind of mechanised/motorised/powered equipment, you must be at least 16 years old.
Do you need a drivers license to drive dirt bikes on road in the UK?
Yes. Any motorised vehicle in the United Kingdom requires a license.
Can you get motorcycle permit if you have suspended license?
if your drivers lincense is suspended,read fine print of suspension it says you can not opperrate any motorised vehicle
Anyone know anything or anywhere to find an egr valve sensor for a 2002 Dodge Stratus RT with ABS?
An EGR valve sensor should be available at any dealership parts department, and almost any auto parts supply store.
What is the usual sailing time for a motorised yacht from the Galapagos Islands to the Marquesas Islands and then on after a stop to New Zealand Coromandel area?
The usual sailing time for a motorised yacht from the Galapagos Islands to the Marquesas Islands and then on after a stop to New Zealand Coromandel area is not known and it may be in any given time.
