0
Is your kettle still getting power to it if you leave the switch on?
Wiki User
∙ 12y ago
Nope, it turns off when the water is boiled.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What do you check on a 1972 Eldorado when there is no power going to the power window motot on the driver's side?
check to see if the window switch of the driver's side is getting power, if you are getting power to the switch and the switch is sending power out to the motor but the motor is not responding the motor needs to be replaced
How do you tell if the window regulator motor or switch is bad?
Use a test light to see if the motor is getting power. If it is then motor is bad. If it is not getting power "jump" the wires on the switch to see if window will operate, is so switch is bad
How do you find out if you have a bad relay fuse on your gsxf katana?
with a test light ensure you are getting power out from the switch, at the same time you should be getting power out of the relay . if your not getting power to the switch but you do from the fuse it can also be in the line.-then determine the cause or keep a spare relay
How do you troubleshoot the driver side window for a 2002 Chevy Tahoe?
Remove switch panel and jump wires on switch- if this works bad switch Remove door panel and see if the motor is getting power-if it is getting power, bad motor
What is the flex of a kettle?
a power cord
What are the Power ratings of a kettle?
25kw
How do you fix power window 2003 Chevy pickup?
remove door panel check to see if you are getting power and ground to motor. If so, bad motor--if no power to motor, check to see if you have power to switch if so ,bad switch--if not bad power feed to switch close but if the switch not on, you never get power to the motor.
If one of the cars power window does not work is it the switch or motor or fuse?
Remove the door panel and check to see if the motor is getting power through the switch - if so motor is bad If it is not getting power "jump" the wires on the switch Look for an open wire - may be located in the door jamb where it flexes
Jumped low pressure switch pressure switch at rear of compressor still nothing?
Make sure that there is power getting to the ac clutch when the switch is jumped. If the power is there then the clutch is bad and needs to be replaced.
1976 TA Power Windows not working what do I do?
Check fuse Check to see if you are getting power and ground to switch Check to see if you are getting power to motors - if so bad motor
On a 1976 Corvette there is power to the passenger side door for the power window unit The unit works great when bench tested What else is causing the power unit not to work?
perhaps you overlooking the switch it self, it may be getting power but is not "transmiting" it.(switch is bad) or the wiring fro the switch to the motor.
Power windows for a 2003 ford ranger will not work what should be replaced?
Check the fuse Check to see if you are getting power to the switch Check to see if you are getting power to the motors - if so motor is bad
