0
located under the driver side dash in a pull down panel
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you replace ecu on 1992 Nissan Sentra?
ECU is located in the floor under the radio console. It has two 10mm bolts in front and a 10mm bolt in the plug also you have to unplug the green relay located on the top of the ECU.
Where is glow plug timer on Nissan terrano?
There is a glow plug ECU behind the drivers side kick panel under the dashboard, and the relay is on the inner wing. You will need to remove the battery to access it
How do you reset the ecu for 97 Nissan 240sx?
you push the reset button on the back of the ECU.
Will a 91 Nissan 240sx hatchback engine fit in a 89 Nissan 240sx coupe?
Yup. you must transfer the whole wiring harness and the ecu though, the job is easy and straight forward, everything is plug and play
Where is the ecu plug on a Chrysler 300c?
The ECU plug in a Chrysler 300 is located in the predator. When looking for it look in a box that is color coded.
2002 Explorer 6-cylinder 4.0 Ecu location?
The location of the ECU is in the engine bay dead center...
Where is the diagnostic plug-in located on a 92 GTI?
You have to plug the computer into the Ecu and the ECU is located under the hood on the drivers side under the plastic peace next to your windshield You have to plug the computer into the Ecu and the ECU is located under the hood on the drivers side under the plastic peace next to your windshield
Can Nissan Maxima ecu stop it from starting?
yes
Where is the ecu located in 2007 Nissan Maxima?
The ECU on a 2007 Nissan Maxima is located on the dash of the vehicle. This is used to reset various lights and other functions on the vehicle.
Where do you find the ECU on a 1985 Nissan 720 PU?
The ECU is underneath the driver's seat of the 720 truck
How do you remove ecu plug on a 02 fiesta it is not a screw or a bolt.?
Finally managed it! the large plug on the ecu was bolted in with some kind of shear bolt. in the end i had to drill the top off of it,remove the plug and then with mole grips remove the thread of the bolt from the ecu.
Where is the Location of governor gear on 1995 Nissan 200 sx?
There is no governor. The rev and speed limiters are programmed to the ECU. You can get rid of the speed limiter and up your rev to 7500 by (direct bolt on) swapping the stock ECU for one from an Infiniti G20 or G20t (OBD2)
