if they both stop working at the same time its a fuse 99% sure
the fuse is blown. they are on the same fuse
Check to see if the Neon stereo lights come on. If the radio lights up then there could be an internal problem or a problem with an external amplifier.
check the fuse
The fact that the lights don't work may be a problem with the fuse. You should have your radio examined by a professional.
I was putting in a new stereo in my car and i was pushing with a screwdriver to pushing the wires throw i cause the lights interior not working and the clock keeps going back one oclock when turned off and car door bleeper and stereo not work at all You probably blew a fuse, check the fuses.
the dimmer control wire to the stereo lights is shorting out to fix need to take radio out and look real close at all the wires
I remove my stereo from my GMC Truck and now my lights don't work
Has it always been like this or not? If it is, then it is not really a problem. It is how the stereo was installed. An stereo can be installed to be turned on whether the engine is on or off. If the stereo cannot be turned off at all, then you have a problem with your stereo.
I'm not sure if this is the same but the ground wire going to the stereo is not really ground! Try running the hot wires for your new stereo right to the fuse box or straight to the bat and see if that cures it. I had a problem that was very similar but it wasn't a Tacoma.
no
I had the same problem in my 97 LS Coupe. I changed out the antenna and that didn't resolve the problem. I replaced the stereo with an after market stereo and the problem was resolved.
Usually it's just a fuse but if you have just had a stereo installed there's an illumination wire that is hooked up incorrectly or if only those are malfunctioning than there are some wire on the back of the gage cluster that are ealy touched/unhooked but I had this problem before and it was the stereo.