Want this question answered?
loosen adjuster bolts and take off belt......
2
Unfasten the alternater mounting bolts, detach the electrical connector and disconnect the lead wires.
To remove a 1998 Nissan Sentra Transmission, you first need to locate all of the bolts. From there, you will remove the bolts. Undo any wiring or tubing that goes into the transmission. From there, it can be taken out.
the dashboard compartment pulls out of the dashboard there is no bolts holding this in. Then there are two bolts that hold the radio at the top. the rest is probably self explanitory as the other parts and bolts come out the same way.
2 an adjustable one on top and a longer one at the bottom of it.
To remove the mirrors from you Nissan Sentra first remove the inside door panel. Pry the plastic mirror cover off of the mirror. Once this is done remove all of the nuts, bolts, or clips holding the mirror to the door.
11 including five mount bolts
First remove the Tire, then Remove the 2 bolts holding the Caliper on to the rotor slide the caliper up and remove the 2 tension springs holding the Pads in place.
none of the parts well interchange at all.. except for nuts and bolts.
To remove the rear bumper on the 2005 Nissan Sentra, you will first need to remove the rear bumper cover by using a flat tool to pry the pins. Then, access the bolts holding the bumper to the frame of the vehicle and remove the nuts. The bumper will then lift off.
jack the front end up --remove the two bolts holding it on . put the new one on get one bolt goin and then the other and bam.