answersLogoWhite
Oldsmobile Alero
Radio

On the factory radio wire harness of a 2002 Oldsmobile Alero what color do you connect to the remote wire of your amplifier?


Top Answer
User Avatar
Wiki User
2006-08-11 14:57:58
2006-08-11 14:57:58

If it is a RDS system, then you will need to connect the blue wire to the remote wire on the amplifier.

Related Questions

User Avatar

if you are using an aftermarket wiring harness hook up the remote turn on wire on the new radio it should be blue with a white stripe to the harness also has a blue and white stripe and plug it in this wire turns on the factory amplifier if you are not using a harness you will have to locate the internal amplifier wire of the radio and connect that to the remote turn on on the aftermarket radio = answer = the inernal apm power wire is white on the black wire harness ANSWER if you dont want to use the factory amp. just run new speaker wires to each speaker.

User Avatar

I'm not sure how to bypass the amplifier, but it is located behind the glove box. There are two harnesses that connect it to the radio. The bottom harness is removed by squeezing the ears and pulling off. The upper harness' release is on the rear facing side and is more difficult to operate. I used a small box-end wrench to take off the mounting bracket, then you can pull the amplifier out and turn it to see the clip.

User Avatar

The on/off lead is a light pink on the first harness on the Bose amplifier (bigger clip). Keep in mind this is the 8 speaker premium sound package but im sure the 6 speaker package is also the same. The amplifier is located on the back wall in the trunk on the left side, just remove the plastic cover!

User Avatar

No. You buy a waring harness and connect it to the car wiring and the amp to the speakers there behind the radio.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.