Remove what's left of belt and manually try to rotate various pulleys to determine what is "frozen" to repair
Drive belt slipping? Compressor seizing and not turning?
Freezing, Glistening, Sparkling
Very likely that the ac compressor is locked up and the belt is slipping.
If your gear shift is freezing it could be because your clutch is not longer working. If you have an automatic then your transmission may be slipping.
Check for a slipping drive belt between encine crank pulley and AC compressor pulley.
Does the power steering and a/c compressor use a common belt? Belt may be slipping or glazed
It could be a belt slipping... the bearings in your ac compressor going out... low fluid level in your power steering reservoir
probably an incorrectly tensioned or adjusted drive belt slipping briefly.
Check the belt on the ac compressor of the 2004 Navigator. It sounds like the belt is slipping when the ac first comes on.
May be nothing more than compressor belt is slipping or A/C compressor may be getting "tired" an may soon need replacement
I assume you meant A/C Compressor. The belt is slipping. Either it is loose and needs adjustment or the compressor is locked up. u either need a new fan blet or compressor clutch is sticking try the fan belt first is the cheaper fix of the two
I assume you meant A/C Compressor. The belt is slipping. Either it is loose and needs adjustment or the compressor is locked up. u either need a new fan blet or compressor clutch is sticking try the fan belt first is the cheaper fix of the two