answersLogoWhite
Car Fuses and Wiring
Headlights Tail and Brake Lights
Peugeot
Ford Escort LX

Peugeot 106 reversing lights not working replace fuse and switch in gear box still not working?

515253

Top Answer
User Avatar
Wiki User
2008-04-27 00:55:37
2008-04-27 00:55:37

have you tried replacing the bulb If its an auto,when replacing the switch on the g/box you have to rotate switch to a certain position.This may be only a few millimetres left or right.Try that

1

Related Questions

User Avatar

I've just bought a Peugeot 307 hdi. I took it back because (I thought) the right side reverse light wasn't working. The garage told me there isn't one!

User Avatar

probably the switch stuck on. pull out fuse in mean time

User Avatar

It would seem that the switch has broken, the switch is located above the pedal, it is easy to replace.

User Avatar

Here you go http://www.peugeotlogic.com/fuses/fuses406/fuses1.htm

User Avatar

probably the brake light switch on the pedal if none are working at all

User Avatar

If the back lights on a Peugeot 206 are not working, make sure the bulbs are new. If the bulbs are not the problem, there could be an issue with the fuse.

User Avatar

There is one reversing light. There is one reversing light.

User Avatar

Changing the dashboard lights from orange to blue in an 05 Peugeot 206cc is rather easy. Make sure you have the blue lights ready. Simply lift the hood of your car and unscrew the lights from behind, and replace them.

User Avatar

Your brake lights are out too! Replace the fuse.

User Avatar

If the bulbs are working then you just need to change te fuse.

User Avatar

What's the question? Yes, a peugeot 106 has dashboard lights.

User Avatar

Parking lights may stay on after a BMW is turned off because the headlight is bad. A faulty relay could also cause this problem.

User Avatar

The most common reason that your dash lights and taillights are not working on your Pontiac Grand Am is blown fuses. Replace the fuses.

User Avatar

how two change my front head lights on a peugeot 206

User Avatar

if it is like mine (2005) it has no supplying cables. only medium and maximum lights cables.

User Avatar

If the lights work a little but appear dim then i would suggest a dodgy earth?

User Avatar

There are two backup lights next to the red tail lights.

User Avatar

Your dashboard lights suddenly not working is almost always your indication that your taillights are out. If the fuse for your taillights is blown and you replace it, your dash lights should be fine.

User Avatar

I haven't worked on your make and model of vehicle so this answer will be generic in nature since the basics are similar for all vehicles. Your problem with the "Reversing" light [Backup light in US English] switch is one of two things: * The switch is not properly adjusted, or * the contact points inside the switch are stuck in the closed [ON] position. This could be the result of a failed return spring or that the contact points have become stuck [welded] together. The fact that the lights are on indicates that the circuit is working. The "fix" for this issue is to make sure the switch position is properly adjusted, and if the problem continues, then replace the switch.

User Avatar

You need the near pair of the rear lights and a screwdriver to unscrew the screws if you want to change the rear lights on a Peugeot 607.

User Avatar

Where's the fuse situated for brake lights on a Peugeot partner 1998

User Avatar

position lights are your side lights

User Avatar

how many reverse lights on a polo 2011

User Avatar

if turn signals are working , and brake lights not working, i would replace the stop light switch on the brake pedal


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.