how to changr pick up coil 88 vandura
Ignition coils are generally external while pick up coils are generally internal to distributor
Two Pick-Ups In One Did you know:A humbucking pick-up is a pick-up that has 2 single coil pick-ups put together.
Rotor Pick-up coil
In the distributor.
96 gmc does not have a pick up coil but the coil is monted to the intake removed by two bolts pick up is in the dis. removed by pulling the dis. then by taking a part
The pick up coil is located at the base of the distributor and plugs into the ignition module. The pick up coil's purpose is to sense or "pick up" the pulses of the distributor and tell the ignition module when to fire the spark plugs. The most critical part of the replacement of the pick up coil is to make certain you properly mark the orientation of the distributor to the engine block and the rotor to the distributor base. When you successfully make these markings, you will not need to check your timing when this job is finished.
could be.... coil ... coil wire or... pick up coil.. not working
Inside the distributor.
No spark.
if the coil is on the distributor cap,remove cover then disconnect wires from the coil and remove coil. if coil is on engine then loosen the bolt and remove from coil mount
Try the pick-up coil