AUTO parts store have a tool to hold the pulley. I used a 24" pipe wrench then turned 36mm or 1 and 7/16" nut with right hand treads, should loosen to drivers side.
by use of fan cluthc wrench ( air hammer)
Remove the fan itself then remove the clutch from the fan
They could be, it depends on the vehicle. On a dodge truck with the Cummins diesel from 1989-2002 it is left-hand thread for example.They could be, it depends on the vehicle. On a dodge truck with the Cummins diesel from 1989-2002 it is left-hand thread for example.
36 mm wrench and a spanner to hold the pulley. Turn counter clockwise to loosen.
you have to have fan clutch wrenches
Remove the fan belt, by loosening the tensioner pulley. Remove the fan clutch with the retaining bolts. Reverse the process to install the new fan clutch.
To remove the fan clutch on a Chevy Tahoe, the upper fan shroud must first be removed. Once removed, a tool is needed to hold the clutch in place to allow for the fan to be removed. The nuts must be unscrewed on the fan in a counterclockwise rotation. Remove the nuts on all side and the fan clutch will remove.
how to remove the clutch fan on the 530i bmw
remove front fan shroud and upper radiator supports loosen fan which is right hand thread normal. you can remove the four 15mm bolts that hold the back shroud on two top and two bottom and pull the fan and rear shroud out at same time remove the 10mm bolts that hold the fan to the fan clutch and reinstall.
Yes, it is an electrically controled mechanical fan.
You need to rent or buy a fan clutch removal tool kit. you need to remove the fan and clutch as one before you can separate the fan from the clutch.
remove the fan clutch and fan first