disconnect the battery for 45 seconds . That will reset the system and allow the AUTO to light up and receive new gas. Once the refrigerant level is correct, that particular light should turn off, and the a/c system should begin to work properly. If not, you can always use a scanner from Autozone, Dicount, or O'Reilly's Auto parts to try to fix it. Hope that helps! Avoid system sealers and leak stop. These products are band-aids, not repairs. Leak sealers react with air. If there is air in the system, the leak stop will congeal into a thick green jelly. www.acpartshouse.com
Get a re-charge kit at Wal-Mart or auto parts - you can jump out pressure switch at top of accumulator/drier with paper clip to start a/c compressor--when pressure builds light should go out
I had the same problem, Just disconnect the battery power for 8 seconds, this will reset the computer, then reconnect the battery this should get the message to erase and your AC should work. This worked for me on a 96 SLS. Adam Quiroz
I had the same problem, Just disconnect the battery power for 8 seconds, this will reset the computer, then reconnect the battery this should get the message to erase and your AC should work. This worked for me on a 96 SLS
the message road is the computer tower
The computer that originates a message to send to another computer is called the encoder. The one that receives the message is known as the decoder.
The computer that originates a message to send to another computer is called the encoder. The one that receives the message is known as the decoder.
It could be symptomatic of a larger problem. The coolant may not be circulating properly, or the indicator panel or car's computer could be developing trouble.
It depends what type of computer you have. Send a message on my message board of what computer it is
Chances are that the CMOS Battery on the motherboard is dead and needs to be replaced. Without this battery, the computer can not remember the CMOS settings when the power is turned off.
An envelope encloses a written message (non-computer).
When you add to it it will come on as soon as the pressure rises to the correct psi to trigger the switch, if you have a guage shoot for about 200 psi on the high side and it should be around 50 on the low. I recently replaced the compressor, drier, and temperature switch on my Isuzu and charged the system with the compressor off until the pressure level rose high enough to trigger the switch. It took quite a while to get the system up to full pressure ( several add attempts with wait time in the middle for system equalization ) every Tech I contacted told me dont do it, it wont work when I'm done but It works great and is the coldest air I have ever felt.
Your e-mail is stored on your e-mail provider's domain server until you download it to your computer. Download and delete means the e-mail message is deleted from the server once you have it on your computer. If you delete the message on your computer, the message is gone. Download and keep means a copy of the e-mail message remains on the server after it is downloaded to your computer. If you delete the message on your computer, the copy remains on the server.