0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you disable brake chime on Oldsmobile 88?
1997olds 88 the brake chime will not shut off where is the sensor so i can disengage it
Why do brake lights in 1965 mustang stay on after replacing the master cylinder?
you forgot to plug in the brake fluid sensor.
98 Oldsmobile silhouette brake lights in back are not working but when headlamps are on all lights in back work what is the problem?
I would suspect a ground problem. Saying that, check the brake light switch.
How do you install brake pads on 1982 cutlass?
Replacing the brake pads on your 1982 Oldsmobile Cutlass is quite easy. Remove the brake pad Springs and caliper. The brake pads will come off. Reverse the process to install the new brake pads
Brake pads Oldsmobile cutlass sierra?
The brake pads on an Olds Sierra are a wearable part. When replacing brakes it is better to change both fronts or both rears at the same time.
How do you replace a 1999 Oldsmobile Silhouette front axle bearing and hub assembly sensor?
First remove wheel and brake caliper and rotor. Unplug wheel speed sensor wire. Remove axle nut. Remove three 1/2 inch head bolts from back side of spindle. Gently tap hub to remove hub/bearing assy. from spindle. Installation is the reverse.
Why do brake pads squeak after replacing pads?
Why do brake pads squeak after replacing pads?
What would cause the brake light to come on a 1986 Oldsmobile after replacing the master cylinder?
check that the emergency brake pedal is completely up.If ok disconnect the electric cable from the emergency brake pedal. i think is brown in color if light turns off the problem is there.
Wheel bearings on 2000 Oldsmobile Silhouette?
Are a part of the hub assembly on the front Cost @ 400+ to repair one side! Rears are more like a traditional drum brake system type Haven't had to replace those
How do you turn off the brake sensor?
Brake sensor indicator
How do you reset the check brake pads warning on a 2004 Volkswagen Passat?
By replacing the front pads . they will reset automatically when the sensor sees the pads are ok.
On a 2000 Dodge 2500 4x4 diesel after turning front brake rotors and replacing brake pads why do ABS and brake trouble lights remain on?
you might have a bad speed sensor or a bad front wheel bearing causing the light to go onTRy replacing the sending unit they go bad very often turning rotors and replacing pads is not the way to fix this. it is the abs sending unit and it needs to be replaced.the correct part you will need to replace is called the wheel speed sensor not sending unit
