Check the owner's manual. If you're lucky, sometimes the dealer or former owner will have written down the code number somewhere in the manual (inside the front cover or on the page that describes the radio operation are favorite places). IF NOT: You will need to retrieve the radio's serial number. On SOME radios you can do this by holding down both the number 1 and the number 6 buttons simultaneously as you turn the radio on. If this is one of those radios, the serial number will appear in the tuning window when you turn it on.
IF NOT: You will need to loosen the radio and slide it far enough out of the dashboard in order to read the serial number off the plate that is affixed either on the back, or the bottom, of the radio case.
When you have gotten the serial number - either call the Honda Customer Service 800 number, or stop by your local Honda dealer and give them the serial number and they should be able to give you the anti-theft security code for your radio.
WRITE IT DOWN SOMEWHERE WHERE YOU WON"T FORGET IT! This will happen every time the battery is disconnected or goes dead.
The code needed to reset the radio is the model number on top of the radio. The you must call a Honda dealer to get the code. If you are the original owenr or have the owners manual, the code may be in the written in the manual. i need to know how to enter the code on the radio the radio reads ERR 3
There is no such reset button on your Honda CRV.
code pour radio Honda crv 1998
Go to your local Honda dealer and buy a new manual. They aren't that expensive. REALLY!!! how to introduice radio code in a crv auto radio?
If the manual is missing getting the code for a 2008 Honda Cr-v radio require making a trip to the dealership. The techs at an authorized Honda dealership will program the radio.
you can take it out of the dash or disconnect the battery and reconnect it, however when you restart the radio it will ask for a code which is most probably in your owners manual. please be sure you check you have this pin before carrying out these methods. you could probably ask a Honda dealer for a slightly safer method and if you don't have a code you should contact your local Honda dealer
Tune the radio to channel 0. The XM code will appear there.
I changed the battery and the auto radio writes or ask code in the crv Honda 2004.althought having it ,the radio writes error 1 toerror eafter many trials. what can I do to go out of it and I have a manual in Arabic which i don't understand I changed the battery and the auto radio writes or ask code in the crv Honda 2004.althought having it ,the radio writes error 1 toerror eafter many trials. what can I do to go out of it and I have a manual in Arabic which i don't understand
You reset it with an OBD2 scan tool.
There should be a small sticker on the inside of the glove box with a 5 digit code on it. Enter this using the radio station keys. It should clear the "code" message and make the radio work.
The on-board computer is factory installed and cannot be 'reset' - it must be replaced.
Try referring to your owner's manual! you also have the second option of contacting the customer service department at Honda Check the link below: Just press radio number #1 and 6 at the same time and the radio code will appear.