1. Turn the ignition key to the "OFF" position with the odometer reading shown.
2. Turn the ignition key to the "ON" position while holding down the "ODO/TRIP" button.
Hold down the button for at least 5 seconds. The odometer indicates "000000" and the light goes off.
If the system fails to reset, the system will revert to the state before resetting operation. In this case, return to step 1 and try again.
it is recommended to have your dealer( service dealer) do this.
The service light indicator on a 2004 Chevy Cavalier tells its owners when to send the vehicle in for maintenance. To reset the light, unplug the battery for five seconds.
How do I reset oil indicator on bmw 325 1987?
no
Airbag. Off light
mb 1004
this work on the 2004 rx330 Make sure only the odometer display is on - ie. it is not in trip a or b mode. Once done, press and hold the reset button next on the left next to the steering wheel, then cycle the key to accessories on. The dashes will disappear one by one on the odometer display until gone. Once gone the resetting procedure is complete.
On my 2005 Element it goes like this. Turn off engine. Press and hold the Select/Reset button on the instrument panel, then turn the ignition switch to on. Hold the button for about 10 seconds until the indicator light goes out.
Do you know how to look at the tire pressure indicator and oil mileage indicator? It is on the same pages as those. Click on the "reset" buttons on those pages. Curt
You have to have the owners manual, there are step by step instructions.
Refer to the service and the user manual to see how you can reset the motor indicator on the Ford Mondeo 2.0 TDCI year 2004.
I am sure this is not the proper way to reset the light, but I disconnected my battery cable for ten minutes and it fixed the problem.
A person can reset the maintenance required light on a 2004 Toyota Sienna by holding down the odometer trip button. A series of zeroes will appear, which indicates that the light has been reset.