0
Should all bolts around front pump on 350 Chevy trans be tight?
Wiki User
∙ 13y ago
They all must be torqued at a certain spec. None will be loose.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you replace front shock on a 93 Chevy G20 van?
Should be 2 bolts (3/4 socket) & remove & replace
What size wrench is needed to remove the caliper bolts on the front brakes of 1979 Chevy blazer?
It should be a 3/8" Allen wrench.
Can you use a regular 1996 Chevy bretta front bumper panel on a 1996 Chevy bretta z26?
Yes. It bolts right on.
How do you remove the front panel to 1982 Chevy Celebrity?
I assume you are asking about the panel that has the head lights and grill in it: It is bolted to the front fender on each side along the edge, remove the bolts. It is bolted to the radiator support bracket along the top and bottom, remove the bolts. There are a total of 12 bolts. When you get all of the bolts off it should just pull right off. You should be able to unplug the lights as you pull it off.
What is the size of the caliper Allen bolts on a 95 Chevy Silverado?
The Allen wrench size for the front caliper slide pin bolts is 3/8".
What are the torque specs for the front caliper mounting bolts on a 1999 Chevy Malibu?
33- Ft lbs.
How do you replace u-joint in front drive shaft on Chevy Suburban 4x4?
It should just come out like the rear shaft, remove the 4 bolts on the front dif and the shaft should just slide out of the transfer case. I have a 98 suburban and it may require a bit of patience getting it around the exhaust pipe which is directly under the shaft.
How do you change front shocks on a Chevy Avalanche?
It will be easier if you pull off the front tires then you have the shock bolts at your reach. It took me 30 min for both front shocks.
Where is the starter located on a 1996 Chevy Cavalier?
The starter should be place around the bottom front of the engine by the oil pan...
What size wrench is needed to remove the caliper bolts on the front brakes of a 2001 Chevy Suburban?
It takes a T55 Torx bit on the front calipers.
F250 2wd heavy duity diesel cant get front cal bolts pins to back in?
Buy a chevy.
Locate the water pump on a 1993 Chevy blazer?
It is the part that the fan bolts to, on the front of the engine GOOD LUCK
