Always the negative cable first.
Disconnect the negative - terminal first, then the positive + terminal. Unfasten the battery hold down clamp. When reinstalling the terminal connections connect the positive terminal first.
The negative terminal of a battery has a - sign and positive terminal has a + sign.
Connect the positive + cable first and negative - last. When disconnecting them disconnect the negative - first and positive + last.
The positive end of a battery goes to the positive end of the terminal. In retro spec, the negative end of a battery goes to the negative end of the terminal.
Disconnect the negative terminal first. Then disconnect the positive terminal. Pull the ends straight up. Unbolt the top of the battery frame and lift up the cover on the battery.
What happens when you inadvertently crossed the positive battery terminal from a negative to a positive and a positive to a negative.?Read more: What_happens_when_you_inadvertanly_crossed_the_positive_battery_terminal_from_a_negative_to_a_positive_and_a_positive_to_a_negative.
make sure radio settings/presets are saved disconnect negative battery terminal disconnect positive battery terminal unscrew the battery mount take battery out put new battery in put the mount back reconnect battery terminals
Disconnect the POSITIVE battery cable and touch it to the negative terminal OR disconnect the POSITIVE battery cable for about 30 minutes (either way drains the capacitors in the electrical system)
The negative battery terminal is on the battery. They don't have a wire coming from it like they do the positive. For charging purposes, the engine block acts as the battery ground. When disconnecting the negative at the battery, the negative terminal usually has a black wire and the positive has a red.
The positive + terminal is slightly larger.
Two. The positive terminal, and the negative.
Yes. That is correct.An easy way to remember/ installation is the opposite: When replacing battery: FIRST disconnect the NEGATIVE -Terminal (black) then the POSITIVE +(red) Installation:Connect the POSITIVE Term FIRST then the NEGATIVE Term.