The bulbs are clear. There is a green rubber ballon looking thing over the bulbs. You can buy bulbs with red balloons at Walmart. number 194.
One filament of bulb burned out (double filamented bulb) Replace bulb
You have to take the whole light out and replace the bulb. Then make sure the lights are realigned.Its not that hard to do.
take the panel out and replace the small bulb
Candles, oil lamps, and gas lights mostly.
Remove the socket from the rear of the fixture, remove faulty bulb from socket and replace with good bulb and replace socket in fixture. Fini!
Just turn the housing the bulb is in and pull it out. Remove and replace the bulb the same way. For the rear lights, you have to push on a tab to release the housing the bulbs are in.
Most of the cars now have composite lights and the lights have to be revomed to replace the bulbs.
To replace a light bulb, you have to: if its in the front, you have to open up the hood and look for the screws that are connected to the lights. For the back, you have to: open the trunk, and unscrew the light bulb, open it up and replace it.
You can replace the marker lights on a 2008 GMC Yukon Denali by removing the retaining screws and disconnecting the wiring harness. The bulb can then be unscrewed and a new bulb put in place.
The front lights come off by two clips you have to slide. The whole assebly comes out and you can replace the bulb. The front lights come off by two clips you have to slide. The whole assebly comes out and you can replace the bulb.
To replace the rear brake lights on a Nissan Primera first open the trunk lid. Locate the tail lights and find the plastic cover which hide the bulbs. Remove the cover and then the bulb. Replace with a new bulb.
You need to replace the bulb in your lights. The dim lights and bright lights have different bulbs.