0
sometimes
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What does the thread take-up do on a sewing machine?
The take up lever is used in threading the sewing machine and to keep the thread tension at the proper level. If the take up lever is threaded improperly, the thread will knot up and jam in the machine.
What is thread take up lever?
it takes the thread up and down so you can keep sewing
Feeds thread from spool to needle?
The thread moves from the spool through the needle to make stitches on a sewing machine. The thread take-up lever is what feeds the thread from the spool to the needle as it moves up and down.
Ano ang kahulugan ng thread take up lever?
pls
Definition of a thread take-up lever?
ano ba yan ang gulo....
What is a presser-bar lifter?
controls the up-and-down movement of the needle and thread take-up lever
What is the meaning and function of thread guide?
Thread guides lead the thread in this order: Thread Spool to Tension Discs to Take-Up Lever to Needle. A machine is threaded with the take-up lever in its highest position and the presser bar lifted. Generally, the thread guides provide a path that keeps the thread from crossing over itself. From the spool, any thread guides mounted on the top cover are first, back to front. On the face plate (front of machine) any thread guides that sit to the right of the tension discs are threaded before inserting thread around & between the discs. If there be any thread guide that is BOTH to the left of the tension discs AND right of the take up lever, the thread would go there next. My fairly typical Japanese Zigzag Machine does not have a thread guide between the tension discs and the take-up lever, but if there were one, I would call it the "Tension to Take-Up Lever Thread Guide." From there the thread passes right-to left through the hole of the take up lever, and then down through all thread guides mounted to the left of the take-up lever. Lastly, the thread goes down through a needle clamp thread guide and through the eye of the needle. Not a short answer, but I hope it addresses your question.
What is the function of take up lever on sewing machines?
To pull the thread back up out of the cloth after the hook inside the machine has passed through the loop created as the needle passes through the cloth.
What is thread take up?
it takes the thread up and down so you can keep sewing
How do you thread Elna 1500 sewing machine?
First, raise the presser foot lever and turn the flywheel towards you to raise the thread take-up lever to its highest point. Next,, place your spool of thread on the horizontal post and hold in place with the spool cap. You know that little nick in the spool where you tuck your thread so the spool won't unravel? Make sure that nick is pointing to the right. Now draw your thread to the left and "click" it into the little silver loop. A 1" oval thread guide sits to the left of that silver loop; draw your thread around the left of the thread guide. Now you're going to loop your thread through the tension discs. You'll see two "cracks" in your machine. First run your thread DOWN through the RIGHT crack, then immediately UP through the LEFT crack. At the top of the LEFT crack is your silver thread take-up lever. This is probably the trickiest part of threading your machine because the lever is always kind of inside the machine. But you can do it! Pass your thread from RIGHT to LEFT through the back of the loop at the top of the silver lever. Whew! We're almost there. Now draw your thread right back down the same crack you pulled it up before. You now have two stationary guides above your needle. Pass it through the thick silver guide and then through the thin silver guide. Both of these moves are kind of a left-to-right motion. Now thread your needle from FRONT to BACK. You're done -- well, except for the bobbin. Hold your bobbin spool above the bobbin case so that it looks like a letter "P" Draw the bobblin thread from RIGHT to LEFT through the small crack in the silver part of the bobbin case, then pull the thread straight toward the back of the machine. Now turn your flywheel one revolution toward you so that your upper thread picks up the bobbin thread. Now close your bobbin cover, and SEW! Congratulations! You did it!
How do you thread a Sears Kenmore model 158.14001?
Take the thread through the first thread guide which is on the right, then through the needle guide notch. Wind the thread around the tension dial and pull up to the left of the dial. Pull the thread into the thread guide at the bottom. Take the thread from front to back through the needle eye.
What is a presser bar lifter?
The presser bar lifter is the lever in the back of the needle bar that lifts the presser bar off the surface of the sewing plate. It is used to remove pressure so the sewing machine operator can do embroidery or non lineal sewing.
