The timing marks on a Nissan 2.4 engine are located on the camshaft sprocket and the crankshaft sprocket. The timing belt connects both together which must align perfectly.
On the harmonic balacer
i have a mazda 1994 626 v6 24 valve car and i think the timing belt just broke where are all the timing marks crank shaft and cams?
shoud be in timing cover on front
54- 61 ft lbs should be about right on the head bolts don't torque them to the specs all at once start about 20 lbs each then about 35 to 40 then torque to spec . do this in a crossing pattern starting in the center bolts criss crossing back and forth out word out side < :::::> when the head is replaced ,it is a good idea on the Nissan or any engine to replace the timing , make sure your marks are right before putting the cover and rest of the engine to geather when you feel you are right with the timing turn the engine slowly over by hand and make sure it turns freely . if it does not turn all the way on the rotation that means posibly a valve is hitting the piston and will couse damage . it would be good to get a chilton book at the local auto store to check the timing marks
every 60,000 miles or 24 months
how do you turn off the check engine light on a 1995 Nissan maxama i have already disconnected the battery dor 24 hours
It is inside the front of the engine, driven by the timing belt.
The safety neutral switch on a 1989 Nissan Pickup with an automatic transmission and a D-24 engine is located on the transaxle. The neutral switch will be found where the linkage attaches to the transaxle unit.
get a service manuel ..... the water pump is behind and run by the timing belt .... if you are not experianced at setting up the timing marks on a DOHC motor get help or take it to someone who is .........
The kind of engine in a Nissan Skyline R33 is a RB25DET, Inline 6 cylinder DOHC(Double Over Head Cam) 24 valve IC turbo with an electrically controlled gasoline injection device.
Leo Marks was born on 1920-09-24.