Not likely. You really should say what kind of car you have also. If you aren't sure how to change a ball joint then you should just pay to have it done. Messing with your suspension can be very dangerous if you dont know what you're doing.
how do i change lower ball joint that is pressed in on a 99 tahoe
How to change the lower ball joint for Mitsubishi diamante 1994
You can not just change the ball joint , you have to replace the whole lower control arm with ball joint.
Begin by removing the tire and wheel from your Kia. Remove the ball joint retaining nuts. Pound the ball joint out with a hammer. Reverse the process to install your new ball joint.
You will need to remove the tire and wheel. Remove the nut from the top of the ball joint. Pound the ball joint out with a hammer. Reverse the process to install the new ball joint.
Jack up car, set on stand. remove wheel. compress spring. remove shock absorber. Have to take lower control arm loose at lower ball joint,( will need a pickle fork to seperate, and will probly tear boot so will need new ball joint boots.) remove spring. reverse order together
A 2004 Chrysler Town and Country does not have an upper ball joint.
The ball joints can be replaced by removing the wheel. Remove the rotor and brakes. Pound the old ball joint out. Insert the new ball joint with a ball joint compressor.
yes Yes, this is a good idea as both parts have taken the same amount of strain.
The vehicle load is supported by the springs, or if so equipped, torsion bars. But the ball joint or joints take a good deal of stress from steering and especially driving on rough or bumpy roads, transmitted through the wheel and steering knuckle.
7879blueovalbronco.com
2000 kia what.