We usually set them at 15 ft lbs
What is the Torque setting on transmission pan bolts 2002 ford ranger?
12ft lbs for transmission pan bolts
torque setting for cylinder head bolts for a skoda felicia
torque setting for 91 cadillac water pump 4.9 engine?
Torque converter bolts No. Fly-wheel bolts YES.
Tighten in a criss-cross pattern to 150 inch pounds. Mark
number 8 reverse torque
The torque on my 1993 is 46 ft lbs.
massey65 torque head bolts please
2006 ford ka 1.3 rocam engin cylinder head torque setting
There are many different bolts on a transmission. Need to know which ones.
what is the torque on the bolts for the transmission pan on a 1991 ford thunderbird 3.8
There will a torque setting but just make sure they are tight. Not super tight or anything just snug them up and they give it a little more. They dont need to be on tight seeing as how thin the bolts are they will break.
Torque for which bolts?? need more information.
what is the torque setting for the head bolts on a 2007 chevy malibu with a 2.2L engine
Remove the driveshaft from the back of your Chevy transmission. Remove the transmission mount retaining bolts. Remove the retaining bolts from the Bell housing. The transmission can then slide backwards. Don't forget to unbolt the torque converter from the flex-plate and remove the torque converter with the transmission.
For setting important bolts to exact tightness required.
The 2001 Hyundai Elantra oil pan bolts torque should be 84-108 in-lbs
In the transmission held on by 3 bolts
The torque setting for the pressure plate on the clutch for an s10 2.2 is 33 foot pounds. The torque for the 4.3 is 29 foot pounds.
5/16 bolts 25 ft/lb