first it is 30 lb then tighten to 40 lb then a further 90 degree turn then another 90 degree turn and job done and the rocker is 10 lb
The 2001 Jeep Cherokee 3.7 liter engine cylinder had bolt torque specification is 150 pounds. The cylinder head bolts should be torqued in 50 pound intervals.
cylinder head bolts---step 1 1997----33ft-lbs-------1998 through 2001---37ft-lbs-----=-2002 and later --44ft-lbs------step2--1997 through 2000---rotate an additional 90 degrees(1/4-turn)===2001 and later---rotate an additional 95- degrees===========these settings are for the 6 cylinder engines..
10mm bolts torque to 18 Ft-lbs 12mm bolts torque to 22 Ft-lbs
The 2001 Hyundai Elantra oil pan bolts torque should be 84-108 in-lbs
The 2001 Chevy Cavalier 2.2 liter engine cylinder head bolt?ætorque specification is 120 pounds. The cylinder head bolts should be torqued in 40 pound intervals.
For the oil pan bolts on a 2001 Ford Escape, the torque should be 18 ft lbs. This is equal to 24.4 N.m.
In four stages, 1st with a torque wrench then with an angular torque gauge. Note: when replacing the head gasket, you should replace the head bolts as well.25 n/m (18 lb/ft) + 70 degrees + 70 degrees + 50 degreesin my original daewoo manual says 25n/m +90 degrees+90 degrees+90 degrees daewoo nubira 2.0 2001
130lbs
35 ~ 46 Foot pounds of torque. Pressure plate bolts.
The head bolt torque specs on a daewoo lanos with the 1.6 liter engine arestep 1 18ft lbs step 2 turn all bolts 70 degrees step 3 turn all bolts additional 70 degrees and step 4 turn all bolts 30 degrees that is what came straight from the torque manual
Brake caliper bolts torque is 90ft-lbs. Wheel Lug Nut torque is 83ft-lbs. Brake caliper bolts torque is 90ft-lbs. Wheel Lug Nut torque is 83ft-lbs.
The correct torque is 13 ft/lbs.