Probably Torx either T45 or T47 Allen TW 12B if its anything like the Luminas iv'e worked on previously it will be a T60 star bit but good luck most kits only go up to T55 your best bet would be to go to autozone or something and buy one seperately or atleats easier
Brake pots are the pistons inside the brake callipers fitted to the vehicle. Slang for brake cylinders.
15 mm is the size,for caliper bolts caliper bracket bolt is t60(it is star shaped)
3/8" Allen wrench.
How do you adjust the parking brake on a1994 Lumina?
your brake callipers may be sticking. Get them checked by a mechanic
Almost all Kia calipers are held with 14 or 17mm bolts, NOT Allen screws.
It is quite easy to install the 1992 Chevy Lumina brake light switch. The brake light switch simply plugs in and out.
on a acura integra type r if you brake the head bolts what do you do on a acura integra type r if you brake the head bolts what do you do
Handbrake and foot brake use different callipers - the handbrake only works on 1 set of wheels (front or rear) whereas the foot brake uses separate callipers on all 4 wheels. In your case, I would guess the handbrake calliper on the affected wheel has failed. Other, foot brake callipers and disks obviously working OK.
I have a 92 lumina 3.4 Mine was above the brake peddle
Usually no. Shoes and discs are parts that wear out, which the caliper isn't expected to do.
Remove the tire and wheel from your 1994 Chevy Lumina. Remove the brake spring and the break caliper. The brake pads will come off. Reverse the process to install the new brake pads.