Spark Plugs and Wires
Dodge Grand Caravan
Jeep Grand Cherokee Limited
Pontiac Grand Am

What are spark plugs used by manufacturer in 2004 dodge grand caravan 3.3L?


Top Answer
User Avatar
Wiki User
Answered 2009-02-11 03:42:13

champion plugs for the part # call your dealer


Your Answer

Related Questions

I forgot to add that the motor in this 94 Dodge Grand Caravan ES is a 3.3L

I would replace the spark plugs after 50K, the wires and plugs again at 100K.

my van will crank, but won't start, had spark plugs change

Same way as the 01 Dodge grand caravan listed below, be really thin or remove the intake manifold....Im having the same issues it's not fun trust me.

I have changed my spark plugs on my 1996 dodge grand caravan SE the engine turns but it don't start. Is there a switch or something in my van that needs to be checked. How do I check my timing belt? What else can I check?

It has one per cylinder. 4 for a four cylinder. 6 for a six cylinder.

In most cases a block heater replaces one of t he freeze plugs in the engine

The 3 rear plugs are very easy to change once the van is on a lift and you are underneath the van. The plugs are completely visible and accessible from underneath the van.

you will have to go under.raise it up ,put some jack stands and reach up!

Various strategically placed areas on the block.

Sorry but without the year and engine size, I cannot answer your question. But, any Auto Parts store that sells you the plugs can provide the answer.

Remove the alternator. The rest will then be obvious.

Check spark plugs, plug wires, do a compression test

Not directly. The plugs are different.Not directly. The plugs are different.

you have to either remove the intake manifold or be really really really thin. also removing the cowling where the wipers and motor assy are will help

There are freeze plugs on the front, rear, and flywheel side.

The torque specification is 13 foot pounds or 130 inch pounds for the spark plugs on a 2007 dodge caravan 3.3 liter

No spark plugs have nothing to do with water in your cylinders. I would guess a bad head gasket, worped head or cracked in the water jacket might be a closer bet. Hope this helps.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.