0
3 components ;
voltage supply or battery
connection wires or wiring
a lamp bulb to indicate presence of current flow within the circuit
when current is actually flowing within the wires.
Wiki User
∙ 11y ago
Wiki User
∙ 13y agoIn order to have a circuit, you must have the following:
a) voltage source
b) load
c) conductor to connect the source and load
Wiki User
∙ 14y agoDon't know what your definition of elements is. Ohm's law relates Voltage, Current and Resistance by the formula V = Current x Resistance.
Add your answer:
Earn +20 pts
How many volts are there in a 200 amp panel?
I assume you are referring to a residential electric panel. The amount of amps has nothing to do with the voltage. They are independent. A typical residential electric panel will have 120 V. That is the easy answer. Usually there are two hot feeds with 120 V to ground. Between the two hot feeds will be 240 V. The bus bars are arranged in the panel so that when you plug in breakers they alternate between the feeds.
What is the design procedure for clamping circuits?
Clamping circuits use diodes and capacitors. First, the first circuit must be set up, then a?æsine wave should be input into it. The input and output should be observed and adjusted as necessary; then, the process should be repeated for the other circuits.
What must happen for an electric motor to spin?
suitable winding and correct power supply
What electrical wiring is required when fitting a new kitchen?
AWG 12/2 wire on a 20 amp breaker. There must be 2 kitchen outlet circuits and each circuit must be protected with a GFCI outlet. Each of these items must be on it's own dedicated 20 amp circuit. Garbage disposal, dishwasher, microwave, refrigerator. This will require 6 dedicated 120 volt 20 amp circuits plus a 240 volt 60 amp circuit for the range.
How does one install a single electric oven?
A single electric oven is usually installed in a tall kitchen cabinet, which has access to an electric socket and can tolerate a temperature of 90C. The cabinet must also have a ventilation system to ensure proper functionality.
What are the three basic features all electric circuits must have?
Three things that an electrical circuit must have to operate is, A) a source. Example- battery B) a line. Example- conducting wires that allow the electricity to pass through and C) a load. Example- A light bulb
What do you mean by quantisation of charge?
The principle that the electric charge of an object must be part of a divisible basic axiom.
Why you need electronic?
We need to use electric circuits so as to make the transfer of electricity easier. you must have seen various paths made in the circuits, these path controls and regulates the flow of current . But if we don't use electronic circuits then we will have to use wires which is very difficult to handle when we have to do large no. of operations li in computer.
5 features of habitat?
The five features of a Habitat is that It must have a Sustainable water supply It Must have a endurable weather condition It must have the basic quality of the a habitat for organism It must have the food quality that the organism feed on It must have a long term duration
The law of the quantization of the charge?
The principle that the electric charge of an object must equal an integral multiple of a universal basic charge.
Why must electricians be extra careful when calculating power requirements for circuits that will run motors?
The electrical code states that motor feeders have to be rated at 125% of the FLA of the motor. When wiring motor circuits always consider the ambient temperature (for wire de-rate purposes) where the motor is located and the 125% rule before selecting the correct wire size. <<>> Extra care must be taken when calculating power requirements for circuits that will carry electric motors because the current need of an electric motor is larger than calculated from its horsepower rating alone. Electric motors are highly inductive and also have an in-rush current requirement to get started. The circuit used to power an electric motor has to be capable of supplying the in-rush and steady state currents to the motor -- with an acceptable I^2-R loss on the wires.
What are two features of the Ibanez RG350DX electric guitar?
The two most dominant features of the Ibanez RG350DX guitar is its locking nuts and great quality whammy bar. It also has the ultimate sound quality and is a must buy for guitar lovers.
What are the two basic types of electric circuits?
There are many different types of circuits, but, in basic electricity, perhaps the two most common types of circuits are parallel and series.A parallel-connected circuit is one in which the current divides into two or more flows with at least one load on each flow, whereas a series circuit has only one flow that passes through two or more consecutive loads. The input voltage to a parallel-connected circuit stays constant - so every branch of the circuit gets the same voltage from the power supply - but there is a different current flowing in each branch dependant on the resistance of the loads in that branch. Overall, no current gets lost because any current entering a particular junction (leading to branches) is always equal to the current leaving that junction.In a series-connected circuit the input current stays constant and the voltage is divided amongst the loads which are connected like links in a chain: each load component (a light, a resistor, etc.) is connected "head to tail" to the next one in the series circuit.A more complete answerActually there are four types of circuit, not two. These are series circuits, parallel circuits, series-parallel circuits, and complex circuits.'Complex circuits' (which are not necessarily complicated) describe any circuit that is not series, parallel, or series-parallel - a Wheatstone Bridge is an example of a complex circuit.The techniques for solving series, parallel, and series-parallel circuits cannot be used for solving complex circuits. Instead, network theorems, such as Thevenin's and Norton's Theorems must be used.
List three features a material must have to be a mineral-?
There are three features a material must have to be a mineral. These features are materials that were never alive, form in nature and not in laboratory.
What two features must a sample have to accurately represent a population?
What two features must a sample have to accurately represent a population?
Does a series circuit always use one battery?
Any circuit may use as many power sources as you wish. For DC circuits you must maintain the same polarity. For AC circuits you must synchronize frequency and match voltages.
Is an Eulerian circuit traversable?
Yes. Because Eulerian circuits are a subset of Eulerian trails, all Eulerian circuits must be traversable since, by definition, a Eulerian trail is traversable.
