Want this question answered?
looking for the correct timing marks
where are the timing marks on a ford ka 1.3 and how do i check the timing is correct
The timing marks on a 2000 Honda Civic Ex Coupe are on the crank pulley. They are also on the cam.
timing marks on a Honda accord lx 2.3 year 2000 specifically the counter balance shaft
My honda passport 3.2 litter, to set the timing my belt has three timing marks on the outside of the belt, crank the motor over till you see the two belt marks towards the top of the cam shaft or around thier if one is at top the other cam can not be seen so botn cams have to be tilted set both belt marks to the cam shaft marks. When the belt comes off dont get the cams out of phase they tend to unwind a bit, put back. A nd the crank shaft has a green timing mart on it after you pull off the pulley and cover, so match the other timing belt mark on the belt to the crank shaft mark then put the tensioner back on now it is on dead set timing.
on the side
there are two kinds of timing marks. one is for ignition timing and one for valve timing.
buy a hanes book
The timing belt marks on a 1994 Honda Civic are found on the cam shafts. The arrows will needed to be point a TDC in order to install the belt properly.
On your top and bottom pulleys ,you have timing marks,they should line up when time is correct.
A timing belt replacement requires loosening the tensioner. Several major components will also need removal. The belt will then be able to slide off, be sure to install the new belt with the correct timing marks.
line up the timing marks on the flywheel and cam