You can call your local firestone (or any other dealer) they should have a book that they can give you the specs from.
The parking brake light stay lit on the 1999 Mitsubishi Montero sport the parking brake is working and you have not put the light off.
Remove the tire and wheel from your 1997 Mitsubishi Montero. Remove the brake shoe assembly. Tap on the rotors to loosen them. The rotors will slide off. Reverse the process to install your new rotors.
check the fuse box under the hood in the engine compartment
The minimum brake rotor thickness for a 2002 Mitsubishi Eclipse is 1.17 inches. When it falls below this thickness, braking performance will suffer and must be replaced.
The minimum disc brake rotor thickness specifications for the 2006 Lexus GS are:Front: 27mmRear: 16.5mm
The 1995 Mitsubishi flasher relay switch and the brake light relay switch can be found beneath the dashboard. Both switches will be on the drivers side of the dashboard, near the brake pedal.
Look at the upper end of the brake pedal under dash area
The minimum disc brake rotor thickness specifications for the 2006 Lexus GS are:Front: 27mmRear: 16.5mm
22.4mm or .330"
The brake rotor thickness for your 2003 Mitsubishi Eclipse, is 0.75. The rotor should not be used if the thickness is less than this.
Break lights come on when you step on the break, they do not come on when the head lights are turned on.
the brake resevior should be located on the driver side against the firewall,clear round cylinder with a white lid ,about 4 inches in diameter