Copper sulphate is an irritant.If it comes in contact with skin it results in itching.Eye contact causes inflammation of eyelid lining.
Sulphuric acid . The 'sulphate' is the clue.
During the electrolysis of Copper sulphate ,at the cathode ,copper and hydrogen both being positively charged migrate towards the cathode.While at the anode
885x140=123900grams of copper sulphate per hour. If you are talking about using 885 gm of copper sulphate per ton of ore in the solution then the density of the copper sulphate(penta hydrate now because it's in water) is 2.284 gm per cm3 so that's 2.284x5=11.42gm per liter of solution, so 123900/11.42=10849.387 liters of copper sulphate(pentahydrate) per hour, NOTE:this is only how much copper sulphate is being used total in the solution which is 30% of the total liters used of solution because 25% of the water is inside the copper sulphate, the other 70% is just water. If you want the liters per hour of solution total, it is 34964.62 litres per hour of your 5% solution. I hope this was what you were looking for, I saw noone had answered and decided to try and get you what you needed.
The hydrated copper sulfate (blue color) become white after heating and releasing of water; the white anhydrous copper sulfate is obtained.
CuSO4 white un-hydrous copper Sulphate used for detection of water as it turns blue if water exists.
the chlorine in the water oxidizes the copper causing an off color, if you used enough of each it would turn a greenish blue color.
Using a computer can have some negative effects that include Computer Vision Syndrome, headaches, and neck pain. Typing can cause pain in the hand and wrist.
Copper sulphate doesn't have a pH on its own, because it has no H+ ions, however when you form copper sulphate solution in water, H+ ions will dissociate from the water. This would depend on the concentration, do you have any idea what concentration you are using?I think it would be weakly acidic, but you need to know the concentration to give a proper pH
Copper (II) Sulfate, is an ionic compound. If that is what you are asking. Anytime you have a metal that has a number in parenthesis after it, you're going to be using ions. The number in paranthesis is what indicates the charge on the ion. For example, Copper (II) would have a charge of +2.
The benifits of using oil for heating is that it does not have negative enviroment effects.
I made a copper sulphate solution using 1 heaped tablespoon sulphate and 90ml water, boiled it and let it all dissolve. then took some bleach in a syringe squirted it in and... It went brown/black looking exactly like bird poo and it went like a paste instantly after touching the solution.... try it, it was fun! :D
By the method of electrolysisCopper is a good conductor of electricity, and is used extensively to make electrical wiring and components. The extraction of copper from copper ore is done by reduction with carbon, but the copper produced is not pure enough for use as a conductor, so it is purefied using electrolysis.