Want this question answered?
what are the vavle timing mark's for a 1994 Plymouth acclaim
where is the timing mark for Plymouth acclaim 1994 2.5 liter?
The timing belt on a 1991 Plymouth Acclaim is replaced by removing the engine accessories, removing the timing cover, and taking pressure off the idler pulley. The belt can then be slipped off the sprockets, a new belt put in place, and the tension restored.
It is under the timing cover on a 3.0L
You don't as it has a chain not a belt.
install timing belt on 1993 Plymouth sundance
Timing belt
You can replace the timing belt on a 1998 Plymouth Breeze 2.0 engine using a Harmonic Balancer Puller 5.
On the transaxle(transmission) bell housing, on the driver's side. there should be a little window cut out on the top there are some notches there. That's the timing marks.
First of all is it the 2.5L 4-cyl or the 3.0L 6-cyl? A Haynes manual for any Dodge or Plymouth using your engine actually has plenty of info. I used a manual for a 1989 Dodge Caravan to change the belt on a 1995 Plymouth Acclaim 3.0L. The engines look identical. If you have the 3.0L: Quick connect fuel lines are in the way. Will have to support the engine to remove the motor mounting. Remove the large motor mounting engine bracket. Remove the serpentine belt. Remove upper timing belt covers. Remove various pulleys AFTER setting TDC. Unbolt and move power steering pump and A/C compressor. Absolutely definitely should replace WATER PUMP too because it is driven by the timing belt. After belt off, check timing belt tensioner by spinning it. Pros will replace it with timing belt.
It is located behind the timing belt. Timing belt must be removed to access the pump. Replace timing belt.
On the V6 it is inside the front of the engine, driven by the timing chain. On the four cylinder it is the lower front pulley on the motor.