48 foot pounds start from the center and work your way out. then go back over them and tighten them an additional 1/4 turn. remember you have to use new headbolts each time you remove the head
what are the torque specs on body mount bolts
Torque for 292 head bolts is 95 ft lbs
For the head bolts, 37lbs
For the 1996 Chevy S-10 4.3 liter, the torque specs for the crankshaft damper bolts is 70 ft. lbs. For the cylinder head bolts, the torque is 65 ft. lbs, and for the engine mount-to-head bolts, the torque is 35 ft. lbs. For the engine mount-to-frame bolts, the torque is 52 ft. lbs.
What are the torque specs for a 1996 Chevy cavalier 2.2l
90 ft lbs
Head bolts are 65 lb/ft. Look at the link, "Small Block Chevy" at the right for all torque specs.
torque especifications for Malibu 1999 3.1 engine
The torque specs for a 235 Chevy include main cap bolts of 100 - 110. Its bellhousing bolts are 45 - 55, flywheel bolts of 50 - 65, and rod nuts of 35 - 45.
33- Ft lbs.
75 lbs--rods 45 lbs
For the 1987 Chevrolet S-10 with a 2.8 liter engine, the torque specs for the cylinder head bolts is 40 ft. lbs. The torque specs for the crankshaft damper bolt is 70 ft. lbs. For the oil pump bolts and the oxygen sensor, the torque is 30 ft. lbs.