Want this question answered?
80Lbs for flywheel, 10 to 15lbs for pressure plate
Pressure plate to flywheel bolts - 24 ft/lbs
pressure plate to flywheel bolts - 15 to 24
The torque setting for the pressure plate on the clutch for an s10 2.2 is 33 foot pounds. The torque for the 4.3 is 29 foot pounds.
Yes, you have to torque everything on the drivetrain correctly. The manual calls for 15 ft-lb (dry and clean) on the pressure plate-to-flywheel bolts.
35 ~ 46 Foot pounds of torque. Pressure plate bolts.
18-20 ft. Lbs
Can i have the clutch pressure plate bolt torque setting not the FLYWHEEL BOLT
You could stretch the bolts, strip the threads out of the flywheel or break the bolts off in the flywheel.
The clutch pressure plate bolts are torqued down to 19 Ft Lbs
I believe that these specs do vary from model to model, but here are the specs for a 97-01 Prelude. Pressure plate bolts - 19 lb ft Flywheel bolts - 76 lb ft
Loose converter bolts or a cracked pressure plate.