h100-35/35 h100 sd and onwards 25/ 25 watt The flasher bulbs a;lso get weaker and weaker starting with h100 at 21 watt and dropping to 10 watt ! Dave Saunders Sedgefield Village County Durham
Replacing a headlight bulb on a Honda Passport is very easy to do. The hood will need to be opened to change the bulb. The old bulb can be pulled off by using the connector and the new one put in. No tools are required.
it is an indicator. You need to check your brake fluid or your bulb.
Depends on what bulb you need. See sources and related links below for a list of lamp part numbers.
If you take out the bulb, it should have information printed directly on it. In my case (2001 Honda Civic LX 2 DR), the bulb reads 9003 HB2 H4 60/55W. If you get a 9003 compatible bulb, then it should work.
Buy a bulb from the Honda dealer or auto parts store (so you get the right one). You will need to remove the instrument cluster trim panel, and then remove the instrument cluster itself. Change out the bulb. Detailed instructions can be found at Alldata and on the internet.
You just need to replace the bulb. It should just turn and click out of the back of the lens (from under the hood) then just remove old bulb from the socket...
Changing a 2007 headlight bulb is very easy. You will need to open the hood and find the bulb at the corner of the headlight assembly. Then you will turn the bulb socket counter clockwise to remove. After the bulb is out, you will replace it with a new one and screw it back into the headlight assembly.
The bulb behind the temperature control knob in a 2002 Honda CRV can be changed by removing the temperature control panel. First remove the knobs then take the front plate off. This is held on by screws that need an Allen Wrench. The bulb can then be accessed and changed.
Buy a bulb from the Honda dealer or auto parts store (so you get the right one). You will need to remove the instrument cluster trim panel, and then remove the instrument cluster itself. Change out the bulb. Detailed instructions can be found at Alldata and on the internet.
To change the headlight bulb you do not need to remove the headlamp assembly. Pop the hood and behind the assembly is access to the light bulb, just unclip it and carefully pull it out from the hole. Then you can remove the old bulb and put the new one in. Don't touch the light bulb! It won't work if you do.
Depends on who manufactured the bulb. Look it up at the parts store in a catalogue they should have next to the bulbs. Or ask them to look it up. You'll need the make, model and year of the vehicle.
You need to change the bulb. The filiment for the brake light part of the bulb is "open" or burned out. The filiment for the tail light portion will still work.