answersLogoWhite

0


Best Answer

GM cars of this era had about 43psi of fuel pressure. As you probably suspect the most common cause of your problem is a bad fuel pump.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What can cause a 1994 Pontiac Bonneville sse to crank over but not start what is the fuel pressure for this model?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the crank shaft sensor located on a 1999 Pontiac Bonneville?

Where is the crank shaft located on a 1999 Pontiac Bonneville? I have bought the part. Just can't find where it goes.


Diagram Disassemble Crank Sensor 91 Pontiac Bonneville?

Did John Brennen convert to Islam


Where is the crank shaft sensor located on a 2001 Pontiac Bonneville?

it should be on the right side right neer the belt


1995 Pontiac Bonneville it will die going down the road and start right back but jerks you have replaced mass air sensor fuel pump fuel filter crank sensor and injectors cleaned Any ideas?

This has happened on my 97 twice- it was the fuel pressure regulator.


Why would a 1989 Pontiac Bonneville continue to cut off at stops if the check engine light is on but you have replaced the starter battery coilpack spark plugs and wires?

I HAD A 1990 BONNEVILLE I HAD THE SAME PROBLEM WITH.IT TURNED OUT TO BE THE CRANK SENSOR.ITS BEHIND THE HARMONIC BALANCER. HOPE THIS HELPS


Where is a camshaft position senson on 1988 Pontiac Bonneville?

The Camshaft Sensor is located right behind the crank shaft fly wheel and can be very hard to change out without consulting a mechanic first.


How do you change the camshaft position sensor in a '93 Pontiac Bonneville SE?

I have a 92 Bonneville thet needs a crank sensor how do you change it Crank sensor is on the pulley and the teeth on the pulley sits inside of it for a megnetic response for computer. It is held on by two small bolts. I changed my own on my 3.8L and my car doesnt want to shift correctly. You are able to adjust and its very picky where the correct position is.


Would an oil pressure sensor cause an 3406-E to crank but not start?

No, it has nothing to do with that.


Where is the crank sensor on 2003 grand am?

where is crank senser located on 2003 pontiac


Where is the crank sensor on a 1989 Pontiac sunbird 2.0?

Crank sensors are always located on the camshafts. The 1989 Pontiac Sunbird crank sensor is located on the head of the engine towards to end of the camshaft.


Where is the oil pump on 96 Pontiac sunfire gt?

it is located inside of the oil pan. if you have low pressure and have high milage you could have bad crank bearing.


How do you get the window crank off on a 1985 Pontiac Grand Prix?

with a window crank removal tool.